Mill Features

Roll Alignment System

Adjusting Particle Size is easy with all adjustments located conveniently on the front of the machine. This allows for easy and accurate adjustment of the particle size. This patented innovation allows precision roll alignment in seconds, while eliminating the need to remove covers and belt guards

 

Dual spring protection allows any  foreign material to pass through the rolls without damaging the machine. This  assembly is a bolt on component, which can be easily replaced; which allows  you to bring the machine back to new machine tolerances.

The Roll Grinding Drive

The photo to the right shows one side of a Patented RMS dual motor drive system. This superior drive system solves many of the all too common problems associated with conventional double sided belt drives:

• Eliminates all belt slippage:     Conventional double sided belt drives slip, stretch, generate excessive heat, and have a lower service factor. Therefore, maintenance issues and cost are much more frequent.

• Eliminating all idlers:     Our three point drive does not need any idlers or tensioners. This eliminates moving components and makes the drive system simpler.

• Allows for shorter roll shafts:     Double sided belts are not rated for as much horse power ; thus more belts and longer shafts are required. With our patented drive we have decreased the number of belts at least by half.

This photo shows another view of a Patented RMS DUAL Motor  Drive System. This RMS 12 x 52" mill is driven by two 75 horsepower motors. As you can see, the machine is designed smarter to offer superior performance, while allowing ease of maintenance.

• Our first priority was making roll changes as easy and convenient as possible, reducing cost and minimizing downtime.
• Cost studies have shown a 35% decrease in service costs over our competitors

Feed Roll

• The feed-roll meters and evenly distributes the product into the grinding rolls. This feature can also start and stop the product flow into the machine; in the event of a power outage the feed roll will stop automatically and prevent the machine from backing up. Our unique design completely prevents any unwanted material from bypassing the feed-roll.
• The feed roll can be slowed to a complete stop, thus shutting off the flow of product to the mill for end of the day shutdown.

Automated Feeder Option

Automated FeedRoll control panel :

• Displays the motor amps of the main grinding motors
• Start/stop button turns feed-roll on or off
• Maintains operator inputted set-point regardless of the desired grind.
• In the event of an over amperage condition the system will continue to slow down the feed roll until the amperage is once again at the preset value (full motor load).
• In a plug up situation in which the over amperage condition cannot be corrected, the system will completely stop the feed roll and sound an alarm.

Benefits:

• The set-point feature allows the machine to continually maintain full load amperage on the main grinding motors; thereby maximizing production ( tons per hour). Or it can allow you to maintain whatever amperage you set the main grinding motors too, thus decreasing how hard your motors work if full capacity is not needed.
• Can work in conjunction with existing automation systems.

Additional Recommend Option:

Roll wear sensor

Benefits:

• This feature prevents product from flooding the top set of rolls, which causes accelerated roll wear
• it also alerts the operator when it is time to have the rolls changed

• Dust free sample ports are standard on our equipment.
• Convenient sampling helps you maintain the highest quality grind